Many Government jobs require a HEPA vacuum when cleaning up. This HEPA vacuum doesn't just clean up but it filters so well

that it cleans the air you breath. With a vacuum that outlasts most HEPA vacuums 4 to 1 you won't go wrong.

We use a Certified "HEPA" Filter per MIL-STD-282: 99.97% min @ 0.3 microns.
We recommend contractors use a micro-prefilter in our HEPA vacuum to extend the life of the more expensive HEPA filter. Use our Micro Prefilter #13141 to enhance the HEPA Filter performance as well as increasing the life of your HEPA filter. A lot of companies claim to have a HEPA vacuum, but they may not be certified. If OSHA walks onto your job site, and your HEPA vacuum is not certified, they will shut you down. Ours is certified. Unlike other HEPA vacuums, the 16006 will never blow any dust. The vacuum will also last many years without problems, unlike many of the traditional wet/dry vacuums.

• Designed to handle extremely fine dust from concrete, stone, fiberglass and drywall
• Patented filter system provides three layers of filtration
• Optional micro-prefilter captures down to .5 microns
• Certified HEPA vacuum model also available
• Clean filters without opening canister
• Primary and Secondary filters may be cleaned without removing the lid.
• There is no need to change the filter when switching from a dry job to a wet job (the filters never get wet).
• Does not cough dust when Wet Dry Vacuum is turned on
• Primary and secondary filters are machine washable synthetic fabric
• Patented double filter system
• Quiet operation, only 81 decibels
• Powerful 23,000 RPM 11.5 amp electric motor
• Tools store easily on the Wet Dry Vacuum
• Automatic air shut off for wet pickups
• Suction hose can be used for draining the 16 gallon tank
• High impact tank for years of trouble free use
• Designed to be used by the most demanding contractor
• Proven improvements make our HEPA Vacuum the best quality HEPA in the market.

Concrete, mortor, stone, drywall, fiberglass. They all produce dust. Dangerous dust. Costly dust. Time consuming dust. It all has to be cleaned up, and a normal shop vac just doesn’t cut it! You need a wet dry vacuum specifically designed to capture the extra fine dust created by these materials. You need the HEPA certified Wet Dry Vacumm from Dustless Technologies.

The Dustless Wet Dry Vacuum has a patented filter system featuring a primary and secondary filter, both made out of machine washable fabric. An agitator rod lets you clean the outer primary filter without opening the unit. The micro-prefilter bag is optional, and delivers many advantages. To install it, simply fit it over the intake port, making sure it snaps completely in place, and close the unit up. It is oversized intentionally so when it’s time to empty the wet dry vacuum, there is still 40% of bag’s capacity to ensure optimum air flow. Other vacuums CPM drops off after collecting only a few pounds of dust. Our maintains optimum CPM with as much as 40 lbs. of dust in the bag. An adhesive seal helps you keep the jobsite even cleaner. The micro-prefilter also retains its strength when wet.

Cycloning water vapor is captured on the ridges of these yellow bars, and drains down, away from the filtration system. A check ball prevents water from rising up to the filters and motor. Unlike other wet dry vacuums, our enables you to go from wet to dry vacuuming without changing the filtration elements.

Our wet dry vacuum also comes with a high-quality floor tool that’s ideal for slurry pickup. The hose can be connected to the drain port so water and slurry can be dumped up to 12 feet away. The hose is very durable. And if it’s ever damaged, repairs are fast and easy to make.

Our floor tool features a brush skirt and wheels for improved performance. It’s far superior to using a broom. The Dustless Wet Dry Vacuum comes with a full set of tools that conveniently store right on the unit. Put a Dustless HEPA certified Wet Dry Vacuum to work for you!