The Pulse-Bac® 2150 Xtreme can take on the most demanding environments, runs without ever clogging the filters.

Equipped with our patented Pulse-Bac® filtration Technology, the PB-2150X is the only industrial vacuum and dust collection unit that will not clog filters during operation. Guaranteed! Our fully automatic filtration system internally flushes filters clear of dust and debris while you work using only ambient air and vacuum, no blowers, shakers or buttons to push! Only Pulse-Bac® Vacuums deliver NON-STOP VACUUM POWER!

The PB-2150 X comes with our patent pending twist on Spun Bond Polyester, P.T.F.E. coated filters. Our exclusively designed filters are 10x more durable than cellulose based or sock filters and are able to capture dust particles as small as 0.1 micron, that's better than some hepa vacuums available to date. The filters non-stick P.T.F.E coating provides an additional resistance to corrosive chemicals and other harsh materials. The filters twist on/off design makes replacing them quick and easy. In addition to our filters, the Pulse-Bac® inside the tank air-dam creates a cyclonic effect inside the upper tank. This feature prevents most dust and debris from ever reaching the filters, and delivers longer filter life, increased productivity and lower maintenance cost.




Standing only 63 inches tall, 28 inches wide and weighing only 220 lbs, the PB-2150X is a maneuverable and lightweight machine that can easily fit through any standard door or elevator. Comparative vacuums can weigh in over 500 lbs, and lack maneuverability. The PB-2150X low weight and compact size is ideal for any jobsite.




The PB-2150X is equipped with today's most advanced vacuum filtration system and vacuum motor technology. The PB-2150X comes standard with an Ametek By-Pass FLO-TEK vacuum motor with Infin-a-tek technology, This motor incorporates the latest advancements in digital control technology and electric circuit design. The FLO-TEK vacuum motor features a lightweight design that utilizes advanced INFIN-A-TEK SR (switched reluctance) brushless motor technology. This technology increases the motor's life and allows for higher motor speeds. Those innovations coupled with improvements in fan and housing design enables the compact, lightweight FLO-TEK motor to provide Pulse-Bac equipment with more than enough CFM and Lift to handle the most extreme conditions and environments.




Works all day long! The PB-2150X innovative tank collection system allows you to dump debris and collect it at the same time, with out ever stopping production. The dual sealed collection tanks will allow the user to remove and dump debris in the bottom tank while leaving the upper tank free to continually collect dust and debris. Once the upper tank is filled, just open the release valve and dump debris into the lower tank, close and seal the upper tank, and then roll away the bottom tank to discard debris without ever turning off the machine or stopping production. In addition, the bottom 8 gallon tank can be lined with our 6 mil plastic bags for containment and removal of debris.



For additional storage capacity, check out Pulse-Bac® Pre-separators, and Extenders. The PB2150X can be used with both our 20 gal. pre-separator or with our Pre-Sep 55/40. The Pre-Sep 55/40 has a 3 inch inlet and allows the transfer of dust and debris into a standard 55 or 40 gallon drum.